FAQs

No, it is not metal paint. It is a patented, cold sprayable metalizing process, comprised of up to 75% pure metal. It is an alternative to chrome plating, foundry metal, metallic paint finishes, plating, and other metalizing processes.

No, metal plating is an electro-chemical process. MakeItMetal, is a cold spray metallization process that can be applied to a variety of surfaces. These include but are not limited to: Laminate, melamine, wood, plastic, gypsum, fibreglass, ceramics, concrete, foam, porcelain, glass, and metal.

No, powder coating is baked on. MakeItMetal is sprayed on, rolled on, hand-applied, or poured on. It also may be cast.

Yes, over the proper substrate and when properly applied. We have documented ASTM testing with zero breakdown equivalent to 25 years.

No, most manufacturers have the necessary equipment, such as a spray booth and polishing items. MakeItMetal can assist you in selecting the proper equipment.

A minimum thickness of 0.008″t o 0.010″ can be achieved in a single spray application, and is  found to be the most desirable. There is no limitation on how thick you apply MakeItMetal; however, the .008″-.010″ is the most economical.

One spray application will achieve the desired mil thickness of .008″- .010″.

The only substances known are silicones, unsealed Styrofoam, Teflon and some epoxies.

Each kit covers 100-125 square feet, depending on the skill of the spray operator and the shape of the piece.

Yes like all successful solid-surface manufacturers MakeItMetal offers training for the MakeItMetal composite metal. A two-day, hands on course can be booked with MakeItMetal in our facility.

No, because MakeItMetal is not metal paint, it does not shrink due to evaporation.

That’s right. There is no heat distortion and no heat impact on the substrate. MakeItMetal is a cold process.

Yes, MakeItMetal can be applied to flexible surfaces.

No, MakeItMetal does not conduct electricity, and it is non-galvanic.